1190259 3" Raynor Black Heavy Duty Rubber Garage Door Seal

3" Raynor Black Heavy Duty EPDM Rubber Bottom Garage Door Seal (priced per pre-cut length.)

  • Heavy duty bottom seal works in Raynor brand Residential and Commercial garage doors and other brands that have retainers that accept 1/4" "T" seal.
  • Seal is 3" wide. Ribbed on one side to help keep out the nasty weather.
  • Seal slides into bottom section astragal retainer
  • This seal works best on the following Raynor garage door models: Affina, Buildmark, Centura, Masterpiece, ShowCase, Decade II and Classic. Can also be used on all commercial Raynor doors (TC200, TC300, TC320, Tri-Core, TM175, TM200, TM220,  Thermaseal,TH160, SteelForm S24-C, S24, S20, S16, DesignForm, StyleForm)
  • Priced per pre-cut lengths of 8', 9', 10', 11', 12', 13', 14', 15', 16', 17', 18', 19', 20', 22', 24', 28', 32' and 40'
  • All seals are cut 4" to 6" longer (at no extra charge) so you'll have extra seal on each end to tuck back into the retainer. This will help to keep the seal from sliding out over time.
  • Installation tip: have two people to install - one to pull the seal through the retainer and the other to feed the seal into the retainer. It's also a good idea to put some soapy water or lubricant on the retainer before trying to pull the vinyl seal through.

 

3" Raynor Black Heavy Duty EPDM Rubber Bottom Garage Door Seal
Click To Enlarge
  • Item #: 1190259
  • Manufacturer: Raynor
  * Marked fields are required.
Qty*
Price $14.00
Reviews (0) Write a Review
No Reviews. Write a Review